Infrared LED Light Bar
Infrared LED Light Bar contains twenty, 3-watt high powered LEDs providing 60 watts of IR LED light power. This LED light emitter bar light runs on any voltage ranging from 9 Volts to 36 Volts. Note that this fixture’s beam can only be seen through the use of night vision goggles. With the 850NM, user can still see a bit of red around the LED bulb when positioned at the correct angle. Whereas 940NM is completely invisible to the naked eye. Flood configuration is available upon request.
The LED light is designed to withstand even the toughest of environments, even when exposed to a combination of waves, hard rains, sand and high winds. These LED light fixtures can be submerged to 3 feet temporarily without leaking. This LED light is designed to go from -40 degrees Celsius to 85 degrees Celsius very quickly. This kind of extreme temperature change can lead to internal condensation issues. The unique design of this LED light fixture eliminates issues associated with those rapid changes that can be occur in desert, arctic or very humid tropical climates. IP68 rated, this LED light is sealed from ingress by water, dust or moisture. The LED lights with the ‘E’ part number designation, however, are larger and heavier than the standard LEDLB series lights. In most cases, the “extreme” models are nearly twice as heavy as their standard counterparts.
We recommend the ‘E’ LED lights for high humidity climates, very cold areas and rough saltwater conditions. They are also applicable to environments where equipment is used in one temperature extreme and stored in another temperature extreme.
This LED light emitter bar light runs on any voltage ranging from 9 Volts to 32 Volts. This means that you can power this LED light emitter bar from any vehicle, equipment, ATV or boat electrical system. You do not need to anything special to operate these multi-voltage units. They will sense the incoming voltage and adapt accordingly.
All of our LED emitter bars are IP 68 rated, being both waterproof and dust proof.
This LED light emitter bar is unique because of the patent pending technology that pairs a reflector with each LED. Typically LEDs are mounted against a surface and “glow”. This glow is often effective at close range, but the light energy drops off rapidly. By pairing each LED with a reflector, the emitted light energy is concentrated and projected outward, so that the “drop off” in light energy does not occur until much greater distances. Like all reflector technology, the amount of light energy projected is directly related to the shape and material of the reflector, as well as the thickness and composition of the lens. Because this LED light bar clusters the LED/reflectors together, the light pattern is both wide and deep. This LED light bar emitter produces a wide spot pattern (or a modified spot pattern) which falls in between a narrow spot and a flood pattern.
LED Light Bar for applications and all kinds of trucks and heavy equipment. This 12 inch wide bar produces 3600 lumens with quantity 20 of 3 Watt LEDs, while drawing only 5 amps on 12 volts (2.5 amps on 24 volts) and offering a 50,000 hour life span.
Each light bar is manufactured with stainless steel and aluminum for strength and durability. The light bar measures 12 inches long, 2.75 inches tall and 3 inches deep.
SPECIFICATIONS:
Length: 12 inches
Height: 2.75 inches
Depth: 3 inches
LEDs: 20
LED Watts: 3
Total Watts: 60
Volts: 12 or 24 volts available
Amps: 5 (on 12 volts) 2.5 amps (on 24 volts)
Lumens: 3600
LED Light Color: Infrared Housing Color: black or white
Ambient operating temperature range: -40 degrees C to 85 degrees C
BENEFITS:
Low amp draw
Instant light output
50,000 hour life
Small form factor
Efficient heat dissipation
Mounting system within the extrusion
Aluminum Housing and stainless mounting hardware
